weight indicators - Rice Lake IQ Plus 710

Rice Lake IQ Plus 710 Weight Indicators

IQ Plus 710 Weight Indicators are an affordable solution to automated process control. If your application involves adding multiple ingredients to a batch, turning on a motor, or starting a conveyor, these weight indictors can perform a variety of complex tasks. This unit is available in both flat and sloped face enclosure styles and has a NEMA 4X IP66 rating.

Indicators: FB 2200 | 420HE/390HE | 120 | 210 | 355 | 390 | 520 | 710 | 720i | 820i | 920i | 420

IQ Plus 710 Weight Indicators

Notable Features

Stainless steel NEMA 4X/IP66 washdown enclosure
Large 0.75” (19 mm) Vacuum Fluorescent Display (VFD) with 16 characters for operator prompting
Selectable analog to digital measurement rate
5-point linearization calibration
4 macros, 30 steps each, ability to interconnect macros with setpoints (macro can start batch setpoints)
8 digital inputs plus 8 digital outputs
60 16-character programmable fields for display prompts
Power for eight 350 ohm load cells or sixteen 700 ohm load cells
Expanded 29-key alphanumeric keyboard
Full alphanumeric keyboard for entering truck ID, numbering, prompts, and more
300-ID truck in/out programs (six modes), 7 characters
Batching and continuous mode setpoint functions
Programmable consecutive numbering
Two communication ports: (1) EDP port, full duplex RS-232 or RS-485, (1) printer port, simplex RS-232 or 20 mA
Operate, configure, and calibrate via 2 interfaces: front panel (keyboard & display) or EDP serial command port (RS-232, RS-485)
Six 300-character programmable output formats, independent transmission to EPD or printer port
300-character alphanumeric “title block” for custom printouts
Completely menu driven
Angled/sloped keypad for user comfort
Time and date
Accumulator

Specifications	-
Power	Line voltages:115 or 230 VAC Frequency: 50 or 60 Hz Power consumption: -100 mA @ 115 VAC (11.5 W) 50 mA @ 230 VAC (11.5 W)
Excitation Voltage	10 VDC, 8 x 350 Ω load cells or 16 x 700 Ω load cells
Analog Signal Input Range	-0.5 – 4.5 mV/V (max)
Analog Signal Sensitivity	.3 μV with digital filters at 4
Resolution	Internal resolution: - More than 1 million internal graduations External resolution: -100,000 displayed graduations
Measurement Rate	30, 15, 7 1/2, 3 3/4 per second
Serial Ouput	Two ports, RS-232, full duplex. EPD Port has an additional RS-485 transceiver; RS-485 is used if an RS-485 address is configured. Printer Port simplex also has a 20 mA active transceiver
System Linearity	Within 0.01% of FS
Circuit Protection	RFI, EMI, ESD protection
Rating/Material	NEMA 4X/IP66, stainless steel
Display	Large 0.75 in (19 mm) Vacuum Fluorescent Display (VFD), 7-digit, 2 unit descriptors, 16 5x7 VFD dot matrix secondary display
Keyboard	Full 29-key alphanumeric flat membrane panel
Digital I/O	8 digital inputs, 8 digital open collector o
Operating Temperature	Legal: 14°F to 104°F (-10°C to 40°C) Industrial: 14°F to 122°F (-10°C to 50°C)
Weight	Sloped: 7.4 lb (3.3 kg) Flat: 7.8 lb (3.5 kg)
Approvals	NTEP - certified at 10,000 Divisions, Class III/IIIL, CC#98-081; Measurement Canada approved, AM-5253, Class III/IIIHD, III at 10,000 Divisions and IIIHD at 20,000 Divisions; OIML approved, TC5678 rev. 1 CE marked UL & C-UL listed
Warranty	2 year limited warranty