MSI 4260 Crane Scales

We offer the 4260 Crane Scale from MSI for all your overhead weighing and material handling projects. Since it was introduced in 1979, the MSI 4260 Port-A-Weigh crane scale has been an industry leader for accurate, reliable and safe overhead crane weighing. No other crane scale comes close in terms of the 4260's many features, benefits, and its performance under the most extreme operating conditions.

Crane Scales: MSI: 3360 4260 | Intercomp: 1500 3000 TL6000 | CAS Scales | RON Scales: 2000 | 2501 | 2125 | 2150 | 3025 | 3050

4260 Port-A-Weigh

Notable Features

Construction: Rugged, Marine Grade 356 Alloy Cast Aluminum Enclosure Sealed to NEMA 4/IP 66
Display: 5 Digit, 1.2in (30mm) LED Display; visible from over 60ft (18.3m)
Sealed Front Panel Switches
Battery Life: 100+ Hour Battery Life (battery charger included)
Capacity Ranges: 9 Standard Capacity Ranges Available
Approvals: NTEP Legal for Trade Approved; up to 70,000lb (35,000kg)
Advanced 20 Bit A/D Converter and 16 Bit Processor
High Resolution: (2,500-5,000 divisions standard, up to 10,000 available)
Calibration: Full Digital Calibration (plus or minus 0.1% accuracy)
Auto-Off and Auto-Sleep Modes
Safety Service Counter (periodic inspection and maintenance reminders)
Programmable Features - Totalizing, Peak Hold, Set Points, Units, Filtering and Self-Test
Optional Full-Function RF Remote Controller
Optional Factory Mutual Approved Version (intrinsically safe for use in hazardous locations)

Specifications	-
Accuracy	± 0.1% of applied load ± ld
Enclosure	NEMA 4, IP66 marine grade 356 alloy
Hook	Crosby thrust bearing swivel hook or equivalent
Safe Overload	200% of rated capacity
Ultimate Overload	500% of rated capacity (except as noted)
Temperature Range	14° to +140°F (-10° to +60°C)
Display	5 digit, 1.2in (30mm) high numeric LED with selectable brightness control
Annunciators	Low Battery, Peak Hold, Motion, Center of Zero, Net, Gross, Total, Units (lb/kg), X 1000, SP1 and SP2
Power	12 volt rechargeable battery (includes 115-230 VAC, 50-60 Hz universal battery charger)
Operating Time	100+ hours depending on brightness settings and average number of segments “On”
Units	Pounds or Kilograms
Service Counter	Registers number of lifts by value for inspection and maintenance reminder
Auto-Off Mode	Select for 12 minutes, 1 hour or Off
Auto-Sleep Mode	Power down during non-use and power up with motion for maximum battery conservation

CAPACITY	RESOLUTION	A*	B*	C*	D*	E*	F*	HOOK	EYE NUT OR SHACKLE	SHIPPING
500 lbs	0.2 lb	18.3 in	2.25	3.06	1.44	1.41	-	5 ton alloy	CR #7	53 lb
250 kg	0.1 kg	465 mm	57.1	77.7	37.0	36.0	-	swivel	Eye Nut	24 kg
2,000 lbs	1 lb	18.3 in	2.25	3.06	1.44	1.41	-	5 ton alloy	CR #7	53 lb
1,000 kg	0.5 kg	465 mm	57.1	77.7	37.0	36.0	-	swivel	Eye Nut	24 kg
5,000 lbs	1 lb	20.5 in	2.50	3.50	1.81	1.69	-	7 ton alloy	CR #8	62 lb
2,500 kg	0.5 kg	521 mm	64.0	89.0	46.0	42.9	-	swivel	Eye Nut	28 kg
10,000 lbs	2 lbs	2.50 in	2.50	3.50	1.81	1.69	-	7 ton alloy	CR #8	62 lb
5,000 kg	1 kg	521 mm	64.0	89.0	46.0	42.9	-	swivel	Eye Nut	28 kg
20,000 lbs	5 lbs	28.5 in	4.00	6.25	2.62	2.41	-	15 ton alloy	CR #11	105 lb
10,000 kg	2 kgs	724 mm	101.6	159	66.5	61.2	-	swivel	Eye Nut	47 kg
30,000 lbs	10 lbs	30.0 in	4.00	6.25	3.00	3.19	-	22 ton alloy	CR #11	125 lb
15,000 kg	5 kgs	762 mm	101.6	159	76.2	81.0	-	swivel	Eye Nut	55 kg
50,000 lbs	10 lbs	41.0 in	5.00	6.00	3.62	3.63	15.0	30 ton alloy	CR 25 ton	235 lb
25,000 kg	5 kgs	1041mm	127	152	92.0	92.0	381	swivel***	# 2130	106 kg
70,000 lbs	20 lbs	43.2 in	5.00	6.00	4.56	3.75	15.0	37 ton alloy	CR 40 ton	270 lb
35,000 kg	10 kgs	1097mm	127	152	116	95.0	381	swivel****	# 2140	121 kg
100,000 lbs	20 kgs	52.1 in	5.75	6.65	5.06	4.25	16.25	CR 45 ton	CR 55 ton	420 lb

CR = Crosby or equivalent
* These dimensions also apply to 50/70/100,000 lb units
with hook and shackle.
** Resolution subject to change for NIST and OIML
approved units
*** Ultimate overload: 490% of kg capacity
**** Ultimate overload: 475% of lb capacity / 430% of kg
capacity
***** Ultimate overload: 450% of kg capacity

Options:

NTEP approved for use in commercial trade (contact factory for U.S. and International specifications)
Substitute shackle for bottom swivel hook (possible headroom loss reduction)
Oversized top lifting eye or shackle
Universal direct power supply: 85-265 VAC, 47-440 Hz/130-300 VDC
Heat shield for high temperature applications (contact factory for operating specifications)
Factory Mutual Approved (intrinsically safe for use in hazardous environments):
Class I, II, III
DIV. 1, Group C, D, E, F, & G
DIV. 2, Group A, B, C, D, & G
RF remote controller - includes On/Off, Zero, Tare, Net/Gross, Total, View Sum, and programmable function keys

Interweigh Systems Inc. 51 Bentley Street, Markham, Ontario, Canada, L3R 3L1
Phone: (416) 491-7001 ~ Toll Free: (800) 268-3269 ~ Fax: (905) 940-1711
Or contact us at one of our four locations: Markham, Mississauga, Woodstock and Montreal