RON Crane Scales - 3050

RON 3050 Crane Scales are industrial hanging scales that can operate where other scales cannot fit. With minimal hook to hook measurements, these crane scales not only mean very little loss of headroom, but much greater portability. Available with either single or double back-to-back displays, they also feature large scale LCD displays that can be read at a safe distance.

Crane Scales: MSI: 3360 4260 | Intercomp: 1500 3000 TL6000 | CAS Scales | RON Scales: 2000 | 2501 | 2125 | 2150 | 3025 | 3050

3050 Hook Type With Remote Display

Notable Features

High Quality Aerospace Steel for superior strength and safety.
Exceptionally Small Dimensions mean minimum headroom loss and greater portability.
Optional wireless communication to additional display of PC.
New: All RON Crane Scales and Dynamometers Fatigue Rated: Improved fatigue resistance level will withstand at least 20,000 load cycles at 150% of rated capacity.
Optional back-to-back displays enable visibility from any direction.
Advanced options include: integrated data logger, analog output, averaging / dampening and more.
Three decades in the industry: Eilon Engineering Ltd has been developing and making RON crane scales and dynamometers since 1976.
Optional IR Remote control
Optional external protection against shocks: Mechanical cage provides three axis shock absorbing to the system housing by the use of special rubber cushions.
Exceptional Long Battery Life - up to 2000 hours on AA disposable batteries.
Internal Shock Protection Design - the electronic board is secured on dampening mounts providing protection from external shock
Wide Temperature Range - -15° F to +175° F (-25° C to +80° C)

Specifications	-
Safety Factor	Designed to 5:1 for the load cell and for the lifting eye. Average straightening load of the hook is at least 4 times the capacity.
Proof Load	Each system proof-loaded to 200% of capacity (certified) up to a test force of 400t.
Accuracy	± 0.1% of full range.
Display	5 digit, 2" (50mm) liquid crystal display and annunciator; two-level overload state, max. value (peak hold), low battery, tare state (gross or net), measuring units, sleep state, charge, and programming instructions. Standard number of measurements per second: 1.
Functions	Zero. Tare. Low battery warning. Max. (peak hold). Two-level overload visual alarms. User calibration. Sleep mode after 60 sec. in zero value, awakes automatically when loaded.
Units	Available in the following measurement readings: metric tons, short tons (2000 lbs), kgs, lbs, newtons, deca newtons, k. newtons.
Load Cell Material	Made of high-strength, aerospace quality, alloy steel, polyurethane coated.
Power	3 x AA (“finger”) 1.5 Volt Alkaline disposable batteries, in the hand-held indicator and additional 4 in the load cell. Batteries rated 3AH will function for at least 1500 hours (more than two months of continuous working). Occasional use will extend the life of the batteries up to several years. Adding certain options will shorten the life of the batteries. All settings retained at power off.
Calibration	User calibration. Initial factory calibration, fully traceable (certified).
Temperature Range	-15°F to +175°F (-25°C to +80°C).
Environmental	Weather proof, NEMA 4, IP65.

Options:

1 or 2 user-adjustable set points
Additional 2"/50mm LCD display with cable connection to indicator
Additional 4"/100mm LED display with cable connection to indicator
Analog output: 0 to 1V/0 to 2V/0 to 3V
Analog output: 4 to 20 mA
Baud rate, user-selectable
Dampened (average) display for unstable load
Data logger – up to 600 measurements
Data logger – up to 3000 measurements
Data logger – up to 6000 measurements
Double, back-to-back displays
Fatigue rated load cell
Number of measurements per second: 2/3/4/5/6/7/8/20/30, factory set
Real-time clock
Rechargeable batteries with an external charger for charging the batteries inside the system
RS-232 - continuous or on demand data output, user-selectable
RS-485 - continuous or on demand data output, user-selectable
Swirel hook (cap. 2.5t-10t)
Totalizer
Units, user-selectable
Wireless (R.F.) data transmission

Dimension Tables and Drawings

3050 Crane Scales

Cat No	Cap.	Resolution		A		B		C		ØD		E		H
-	tons	kgs	lbs	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch
CW-005#	0.5	0.2	0.5	51	2	38	1.5	31	1.25	13	0.5	25	1	330	13
CW-01#	1	0.5	1	38	1.5	31	1.25	31	1.25	10	0.38	22	0.88	330	13
CW-125#	1.25	0.5	1	51	2	38	1.5	31	1.25	13	0.5	25	1	330	13
CW-016#	1.6	1	2	51	2	38	1.5	31	1.25	13	0.5	25	1	330	13
CW-025#	2.5	1	2	67	2.63	51	2	29	1.13	19	0.75	29	1.13	290	11.5
CW-03#	3	1	2	67	2.63	51	2	29	1.13	19	0.75	29	1.13	290	11.5
CW-032#	3.2	2	5	67	2.63	51	2	29	1.13	19	0.75	29	1.13	290	11.5
CW-05#	5	2	5	89	3.5	63	2.5	37	1.5	25	1	37	1.44	330	13
CW-10	10	5	10	102	4	78	3.13	57	2.25	32	1.25	57	2.25	480	19

*Use shackles with S.W.L.
(Safe Working Load) Equal to, or greater than systems full range.

Interweigh Systems Inc. 51 Bentley Street, Markham, Ontario, Canada, L3R 3L1
Phone: (416) 491-7001 ~ Toll Free: (800) 268-3269 ~ Fax: (905) 940-1711
Or contact us at one of our four locations: Markham, Mississauga, Woodstock and Montreal